Led Hanging Panel Light Installation Form

- Jun 09, 2017 -


Led ceiling lamp is a super-thin energy-saving environmental protection and security of LED lighting, this section of the panel with the latest LED light source technology, by consumers like, LED Suspended Panel Light companies concerned about an energy-saving environmentally friendly lighting fixtures, can replace the There are traditional panel lighting, with good color consistency, optional color temperature, high brightness, long life, low energy consumption, green and so on. Buy led hanging panel lights after we how to install led hanging panel lights it, the following for a brief introduction.

The concept of hanging panel lights

Led hanging panel light is a high-end indoor lighting, outside the anodized by the aluminum alloy for the LED light source, the design of beautiful lighting simple, luxurious atmosphere, good lighting effects, can give people a beautiful feeling. Led hanging panel lamp design is unique, light high light transmittance of the light guide plate after the formation of a unified flat light effect, illumination uniformity is good, soft light, LED Suspended Panel Light comfortable and bright, can effectively alleviate eye fatigue. Led hanging panel lights can also prevent radiation, will not stimulate pregnant women, the elderly, children's skin.

Second, the installation of led panel lights installed instructions

1. Turn off the power switch.

2. Connect the input of the specified power supply to the mains (100V-240V) to ensure reliable connection and no copper wire.

3. LED Suspended Panel Light Connect the DC output of the power supply to the input female of the lamp to ensure reliable operation.

4. Secure the power supply and fixture in the proper position.

5. Turn on the power and use it.

Three .led hanging type panel light installation form

1. Slide into the 50mm aluminum frame ceiling: first in the top of the ceiling to play a few screw holes, and then slide the panel lights into the top of the box 3 fixed on the wall, to confirm the screw firmly. And then slide the panel light to a fixed slide-type ceiling box, and then use the screws to fix the fourth side on the frame. LED Suspended Panel Light Easy and time-saving

2. Embedded: first in the ceiling to install the sheet metal slot, and then in the led hanging panel lights on the back of a few pieces of protruding out of the bracket, and then the panel lights into the stent and the ceiling of the sheet metal slot match Can be fixed on the ceiling. But because of the different thickness of the ceiling, so the need to adjust the height between the lamp surface and the bracket, otherwise it will cause the led hanging panel lights installed higher or lower than the ceiling surface of the phenomenon.

3. Hanging type: a good drill hole on the drill hole, LED Suspended Panel Light the hanging parts fixed, locked screw hanging down vertically, in the led hanging panel lights on the back of the hanging components. Easy to install. Consumers must pay attention to ask to understand the suspension of the components is the manufacturer's standard accessories or optional.


Previous:LED Flood Light Uniformity Next:LED Panel Lights Light Evenly