LED panel lights with its uniformity of illumination is good, refers to the higher, uniform light and soft, comfortable and so on, is widely used in office, schools, hospitals, shopping malls, LED Surface Panel Light home and other places, as the replacement of the traditional era of LED lighting grid Good products.
LED panel light is an ultra-thin energy-saving environmental protection and security of LED lighting, this section of the panel with the latest LED light source technology, by consumers like, companies concerned about an energy-saving environmentally friendly lighting fixtures, can replace the existing tradition Panel lighting, with a good color consistency, optional color temperature, high brightness, long life, LED Surface Panel Light low energy consumption, green and so on. After buying LED panel lights how do we install LED panel lights do, LED panel lights three installation:
The first installation method is fixed
First in the ceiling to play a few screw holes, then the LED panel lights slide into the ceiling mounted on the ceiling, fixed three sides. And then slide the panel lights into a fixed slide-type installation box inside the slide, LED Surface Panel Light then the fourth side to the screw on the fixed frame like. Easy and time-saving
The second installation method wire hanging type
Put on the ceiling on the fixed hanging line installation, lock the screw (hanging line factory has been installed.) Hanging line vertical down, in the LED panel lights on the back of the hanging components. Easy to install. Consumers must pay attention to ask to understand the suspension of the components is the manufacturer's standard accessories or optional.
The third installation method is embedded
First install a sheet metal slot on the ceiling, and then fixed a few outwardly protruding brackets on the back of the LED panel lights, and then insert the panel lights so that the bracket engages with the sheet metal slot on the ceiling and can be fixed on the ceiling. LED Surface Panel Light But because of the different thickness of the ceiling, so the need to adjust the height between the lamp and the bracket, otherwise it will cause the LED panel lights installed higher or lower than the ceiling surface of the phenomenon.
The above three installation methods in the actual installation process should also pay attention to the following installation: 1. Before installation, LED Surface Panel Light please sure that power has been cut; 2. Attention to waterproof, anti-electric, shock; 3. Product use standard operating voltage, do not exceed the working voltage Range; 4. This product is only used indoors; 5. Please read the instructions carefully before installing the product.